Cams

Download PDF

A large range of cams are available. Cams can be straight, 450 cranked or 900 cranked. Cams can also be notched on either edge as required.

Cams can be fitted at 3, 6, 9 or 12 o’clock as shown. Please specify following details when ordering

1. For all cams:

2. For cranked cams:

3. For notched cams when viewed from front of lock:

If fitted at 6 or 12 o’clock specify whether notch is on Left or Right hand side.
If fitted at 3 or 9 o’clock specify whether notch faces upwards or downward.

CAM POSITION	CAM MOVEMENTS
EXAMPLE CHOOSE CAM POSITION WHEN LOCKED (VIEW FROM FRONT)	MOVEMENTS CAM MOVEMENTS TO LOCK/UNLOCK CORRESPOND TO THE KEY MOVEMENTS. PLEASE SEE STANDARD MOVEMENTS PAGE.

DIMENSION ‘X’
LENGTH OF HOUSING	LENGTH OF HOUSING	LENGTH OF HOUSING	“X” DIMENSION IS THE DISTANCE BETWEEN THE UNDERSIDE OF LOCK HEAD AND INSIDE FACE OF THE CAM “A” IS DIMENSION TO BE SPECIFIED ON CAM NUMBER SEE STANDARD CAMS & MINI CAMS

DIMENSION ‘B’
			“B” DIMENSION - IS THE WORKING LENGTH OF CAM MEASURED FROM CENTRE OF LOCK. N.B. WITH A NOTCHED CAM STATE “NOTCHED - LEFT” (SHOWN) OR “NOTCHED - RIGHT”.

Standard Cams & Mini Cams

UNDERSTANDING THE 7 FIGURE CAM REFERENCE
1st Number	2nd Number	3rd Number	4th & 5th Number		6th & 7th Number
CAM PIERCING	CAM THICKNESS	SHAPE	DIMENSION ‘A’ IN 0.4mm INCREMENTS SEE TABLE BELOW		DIMENSION ‘B’ IN MILLIMETRES (mm)
6= 8 mm sq FOR STANDARD CAMLOCK IF DIFFERENT WE WILL SPECIFY	3 = 2.8mm	0
		1
		2	4th & 5th No.s	SIZE IN mm	CAM TYPE	W = mm
		3	4th & 5th No.s	SIZE IN mm	CAM TYPE	W = mm
M = FOR MINI CAMLOCKS	2 = 2mm	4	02 04 08 12 14 16 20 24 28 32	0.8 1.6 3.2 4.8 5.6 6.4 7.9 9.5 11.1 12.7	M T 6	12.7 14.3 15.5
		5
		6
		7
		8
		9
T = 6.5 mm sq FOR OFFICE FURNITURE & SOME CAMLOCKS
		NOT ALL CAM VARIATIONS MAY BE AVAILABLE, REFER TO PAGE STANDARD CAMS

STRAIGHT CAMS - 2.8mm THICK			CRANKED CAMS - 2.8mm THICK
	DIM. B.	PRODUCT REF. No.		DIM. A.	DIM. B.	PRODUCT REF. No.
	20 22 30 34 36 38 44 46 48 51 54	6310020 6310022 6310030 6310034 6310036 6310038 6310044 6310046 6310048 6310051 6310054		1.6 3.2 4.8 6.4 7.9	22 30 34 38 48 54 70 21 29 33 35 37 47 53 69 28 32 34 36 46 52 68 27 31 33 35 45 51 67 26 30 32 34 44 50 66	6340422 6340430 6340434 6340438 6340448 6340454 6340470 6340821 6340829 6340833 6340835 6340837 6340847 6340853 6340869 6341228 6341232 6341234 6341236 6341246 6341252 6341268 6341627 6341631 6341633 6341635 6341645 6341651 6341667 6342026 6342030 6342032 6342034 6342044 6342050 6342066
STRAIGHT NOTCHED CAMS - 2.8mm THICK			90° CRANKED & NOTCHED CAMS - 2.8mm THICK
	DIM. B.	PRODUCT REF. No.		DIM. A.	DIM. B.	PRODUCT REF. No.
	16 24 28 30 32 42 48	6320016 6320024 6320028 6320030 6320032 6320042 6320048		1.6 3.2 4.8 6.4 7.9	24 28 30 32 42 48 23 27 29 31 41 47 26 28 30 40 46 25 27 29 39 45 24 26 28 38 44	6370424 6370428 6370430 6370432 6370442 6370448 6370823 6370827 6370829 6370831 6370841 6370847 6371226 6371228 6371230 6371240 6371246 6371625 6371627 6371629 6371639 6371645 6372024 6372026 6372028 6372038 6372044

LOCKING CAMS FOR USE WITH RADIAL PIN TUMBLER CAMLOCKS. STANDARD THICKNESS 2.8MM - STANDARD FINISH ZINC PLATED
	PART No.	DIM. B.	RETAINER PART. No. 70076-0100			TWO-POINT CAM PART. No. 65275-0120
	65287-0100 65287-0200 65287-0300 65287-0400 65287-0500 65287-0600 65287-0700 65287-0800 65287-0900	50 38 35 32 48 54 28.5 25.5 40.0	RETAINER PART. No. 70076-0100			TWO-POINT CAM PART. No. 65275-0120
A FURTHER SELECTION OF CAMS ARE AVAILABLE ON REQUEST			RETAINER PART. No. 70063-0100			THREE-POINT CAM PART. No. 65283-0120
	PART No.	DIM. B.
	65274-0100 65274-0200	22,2 34,0
							PART No.	DIM. B.
							65273-0100 65282-0100	31 23
PART No.	DIM. A.	DIM. B.	PART No.	DIM. A.	DIM. B.
65265-0100 65265-0200 65265-0300 65265-0400 65265-0500 65265-0600 65266-0100 65266-0200 65266-0300 65266-0400 65266-0500 65266-0600 65271-0100 65271-0200 65271-0300 65271-0400 65271-0500 65271-0600 65344-0100 65344-0200 65347-0100	3,2 3,2 3,2 3,2 3,2 3,2 2,4 2,4 2,4 2,4 2,4 2,4 4,5 4,5 4,5 4,5 4,5 4,5 6,0 6,0 7,8	35 25,5 28,5 40 21 32 31,8 20,7 40 22 30 60 31,8 40 35 25 60 30 28 32 38	65277-0100 65277-0200 65277-0300 65277-0400 65277-0500 65277-0600 65280-0100 65280-0200 65296-0100 65296-0200 65296-0300 65296-0400 65298-0100 65298-0200 65299-0100 65299-0200 65299-0300 65300-0100 65300-0200 65300-0300	2,4 2,4 2,4 2,4 2,4 2,4 4,5 4,5 10,5 10,5 10,5 10,5 7,8 7,8 6 6 6 3,2 3,2 3,2	32 30 25,5 22,5 40 47 37 40 55 59 42 35 37,5 34,0 32 48 44 40 35 28,5
						PART No.	DIM. A.	DIM. B.
						65285-0100 65285-0200 65285-0300 65285-0400	14,5 14,5 14,5 14,5	32 40 52 23

2-POINT CAMS
6523360	B5250
3-POINT CAMS
6523390	B5233
B5238 STARLOCK FIXING WASHERS AVAILABLE	B5165 STARLOCK FIXING WASHERS AVAILABLE

2-POINT CAMS	3-POINT CAMS
DRIVE CAM WITH STUMPS PART No. 6521820 WITHOUT STUMPS PART No. 6521821
	We have a range of special cams cranked towards, or away from, the handle. Details available on request. For large quantity orders a special cam can be produced to suit customers requirements	PART No. 6522680 6523291 6522650 6522750	DIMENSION B 36 44 60 63
CAULKING CAMS	RETAINING PLATE	RETAINING PLATES
PART No.6523160 FOR M8 SPINDLE ON HANDLES ALL CAMS SUPPLIED TO ‘B’ DIM TOLERANCE ± 1.0mm	No. 6521860 FOR USE WITH CAMLOCKS AND HANDLES	FOR USE ONLY WITH HANDLES

CAMS

PRODUCT REFERENCE NUMBERS
DIM. X.	DIM. A.	PART NUMBER
16	0	6525301
20	4	6525302
25	9	6525303
30	14	6525304
35	19	6525305
40	24	6525306
45	29	6525307
50	34	6525308
NOTE: DIMENSIONS ‘X’ IS IDENTICAL WHEN CAM IS USED ON PRODUCTS 0011, 0012, 0013, 0014, 0021,0022, 0023, 0024 OR 0025. NOT SUITABLE FOR 2609
KEYS FOR SPANNER LOCKS

8 TRIANGULAR	7 SQUARE	DOUBLE BARB	DOUBLE BARB
KEY FOR 00139304673	KEY FOR 00129304671	KEY FOR 00149304672	KEY FOR 00119304670